Promise Technology 66 Pro - Manual (Page 56)

SuperTrak66™ User's Manual Chapter 4
- 45 -
Deleting an Existing User
1) Select the icon representing the user you wish to delete.
2) Right-click the icon and select “Delete” from the pop-up menu.
3) Choose “Yes” if this is a user you wish to delete.
NOTE: SuperCheck will not allow deletion of the last account with admin privileges.
This protects the admin from being locked out of the system and having to re-
install SuperCheck.
Accessing Message Agent
1) When clicking on any Message Agent (if you are not already logged into
the Agent), you will be prompted for password entry.
2) Enter the account/password for this system to access the Agent and to gain
access to the SuperTrak system.
3) Checking the “Save password” box will remember the password for this
Message Agent. Future accesses to this Message Agent from this terminal
will not require password input.
4) Click “OK” to submit the password and access the Message Agent.
Creating a New Array
1) Select the IOPx (or Controller) icon on which you want to create an array.
2) Right-click the icon. Click “New”, then select “Array” from the pop-up menu.
3) Enter the pertinent information in the “Name,” RAID Level” and “Block Size”
fields. (Available RAID level selections are based on number of drives to be
used; Block Size is selectable from a pull-down list or use the default 64K)
4) A new array icon will be created in the Tree View, titled with the text
entered into the “Name” field.
5) Drag and drop any unassigned drive icon on top of the array icon which
you have just created in order to add the drive to the array (unassigned drive
icons do not have a red arrow in the upper left corner). Hard drive(s) will then be
assigned to the array in the order that they are dragged on to the array icon.
6) If you incorrectly selected the wrong disk for the array at this time, simply
highlight that disk in Tree View, right-click the mouse, and select Delete from
the pop-up menu. The disk will be removed from this array.
7) Repeat step 5 until the array is completed.
8) Press the “Commit” button and reboot the Operating System for a new array.