Promise Technology 66 Pro - Manual (Page 40)

SuperTrak66™ User's Manual Chapter 3
- 29 -
Figure 13: Assigning Bootable Array
Disk Array Recognition Order
During startup, the disk arrays on the SuperTrak66 are recognized in this order:
1) The array set to bootable in the SuperBuild T M setup
2) By the Array number (i.e. Array 1, Array 2…). This would be involved in
determining which drive letters will be assigned to each disk array.
Saved Disk Array Information
NOTE: Promise suggests that users record their disk array information for future
reference.
All disk array data is saved within the reserved sector of each arrayed drive.
Another feature of the SuperTrak66 disk array system is to recognize drive
members even if drives are moved to different IDE channels on SuperTrak66. Since
each drive’s array data identifies itself to the array, it is possible to reorder the
drives without modifying the array setup. This is valuable when adding drives, or
during a rebuild.
3.6 Delete Array
By pressing [4] from the “Main Menu” screen, the “Delete Array Menu” screen is
displayed (see below).