Promise Technology 66 Pro - Manual (Page 18)

SuperTrak66™ User's Manual Chapter 2
- 7 -
2.2 Quick Installation Checklist
Refer to this checklist to ensure that all hardware and software components
necessary for your SuperTrak66 to operate efficiently are installed.
Hardware Installation
þ At least one drive is cabled and attached to the controller.
þ SuperTrak66 controller card is fully inserted into a bus mastering PCI
slot and mounted with a bracket screw
þ Minimum of 8MB EDO RAM is inserted into the SIMM slot on the
controller card
þ A 3V (CR2032 or compatible) battery is installed correctly on the
controller card and the protective label removed.
Software Installation
þ Promise SuperTrak66 BIOS is loading correctly at system boot
þ At least one array has been created with the drive(s) attached to the
SuperTrak66 using SuperBuild or SuperCheck
þ If the array is to be a system drive, it is partitioned & formatted
appropriately
þ SuperTrak66 Message Agent is installed (automatically installs I
2
O
driver component)
þ If this system is to be a monitor ing gateway or server, the SuperTrak66
Message Server is installed
þ If this system is to be used for monitoring SuperTrak66 server systems,
SuperTrak66 SuperCheck utility is installed.