3 supercheck quick reference – Promise Technology 66 Pro User Manual
Page 55
![background image](/manuals/181108/55/background.png)
SuperTrak66™ User's Manual
Chapter 4
- 44 -
4.3 SuperCheck Quick Reference
The following section is a listing of initial steps necessary to complete each task
during administration of a SuperTrak66 server system using the SuperCheck utility.
These tasks are not listed in any particular order, nor is this intended to be a
complete, step-by-step guide to setting up the software successfully. Please refer
to the previous section 4.2, “SuperCheck Administration," for details on what tasks
to execute for basic operations."
To Create A New Message Server
1) Right-click on the “MyConsole” icon
located in the Tree View area of the
SuperCheck main menu (or left-click "MyConsole" from the pull-down
selections at the top of the main menu).
2) Click on “New”, then “Server” in the expanded pop-up menu
3) In the message server Information View, enter “Label,” and “IP address”
information. If you are not sure of the server name, try just entering the IP
address.
4) Click the “Confirm” button. Once a new Message Server is created, it will
create a Message Agent icon
automatically.
Creating A New User
1) Log into the Message Agent for which you would like to add a New User.
2) Right-click the “Users” icon
in the Tree View area of SuperCheck Main
Menu. Then left-click on “New” and select “User” from the pop-up selection.
3) A “New User” icon
will appear. Double-click on it to view the user
Information View.
4) Modify all the user information according to the desired access level for the
new user.
5) If the user has any level of administrative control, and the server is connected
to a WAN, make sure to set a password.
6) Click the “Commit” button to update the user information.