Kodak I7300 - Manual (Page 79)

4-8 A-61133 March 2003
Setting values on the Film
tab The film format and reduction ratio of the images on film can be defined
using the Film tab. Do not click OK until you have made all of your
selections on all of the tabs.
1. Select the Film tab on the Setup Application dialog box.
2. Film Format. Select the Film Format from the list box:
•
Simplex — one image appears across the width of the film.
•
Duplex — the front and back of the same image appears across
the width of the film.
•
Duo/Duo Duplex — images are filmed to the end of one side
(channel) of the film, then other images are filmed on the other
side (channel).