Kodak I7300 - Manual (Page 103)

4-32 A-61133 March 2003
Modifying an
existing application Modifying applications is similar to creating a new application. Refer to
the previous section entitled “Setting up a new application” if you need a
description of the fields on the tabs.
To modify an application:
1. Select Setup>Application. The Select Application dialog box will be
displayed:
2. Select the application you want to modify from the Application drop-
down box.
3. Select Modify. The Setup Application dialog box will be displayed:
4. Make any changes required on each of the tabs.
5. When all changes are made, click OK.