Kodak I7300 - Manual (Page 160)

D-6 A-61133 March 2003
3890 film, Image
Processing tab template
settings The information below includes only the values that are different from
the system default settings. For more information about the Image
Processing tab, see the section entitled “Setting values on the Image
Processing tab” in Chapter 4.
When Duplex Processing is enabled, there are four available Scan Area
settings. Separate image processing parameters can be specified for
each except for Resolution, Scan Output and Film Polarity.
Template specific settings
1. Scan Area: Primary
2. Duplex Processing: Manual
3. Resolution: Enhanced
4. Rotate: 180
° clockwise
5. Border: Border Remove
6. Film Image Quality: Normal Film
7. Overscan: Enabled
Template specific settings
1. Scan Area: Film View
2. Duplex Processing: Manual
3. Resolution: Enhanced
4. Rotate: 180
° clockwise
5. Border: Border Remove
6. Film Image Quality: Normal Film
7. Overscan: Enabled
Template specific settings
1. Scan Area: Front
2. Duplex Processing: Manual
3. Resolution: Enhanced
4. Sharpening: Photo & Text
5. Rotate: 180
° clockwise
6. Border: Border Remove
7. Film Image Quality: Normal Film
8. Overscan: Enabled
Template specific settings
1. Scan Area: Back
2. Duplex Processing: Manual
3. Resolution: Enhanced
4. Sharpening: Text
5. Rotate: 180
° clockwise
6. Border: Border Remove
7. Film Image Quality: Normal Film
8. Overscan: Enabled