Kodak I7300 - Manual (Page 25)

2-20 A-61133 March 2003
The CAR menu The CAR menu provides the following options:
Setup

allows you to associate a retrieval application with a CAR
mode and configure the CAR communication port.
Ready

signals back to the CAR system that it is ready to receive
downloads, batch downloads or direct commands. Applicable only when
using the CAR Interface Software configured as listen-talk.
Download — allows you to perform download operations. The CAR
commands do not need to be loaded into registers during these
downloads.
Registers — allows you to save, load, view and clear registers. You
can also display the contents of a range of registers by selecting Start
Batch. The contents of the registers cannot be changed.
Monitor

allows you to stop and resume execution of CAR
commands to perform image processing functions or use the menu
functions.
For more information regarding the Kodak CAR Interface Software, see
Chapter 5, Setting up CAR Applications. Appendix C, Glossary, also
provides some common terms and definitions regarding CAR.
NOTE: The CAR menu item only appears on the menu bar if you have
purchased the CAR Interface Software. If you purchased the
CAR Interface Software, and CAR does not appear on the
menu bar, call Kodak service.