Kodak I7300 - Manual (Page 110)

5-6 A-61133 March 2003
Dumping jobs Occasionally it may be necessary to view the data that is sent by the
host computer and analyze it. The Dump menu options are intended
for diagnostics, not everyday operation. The following options are
provided:
View Dump…

allows you to view the data that is sent by the CAR
host computer to the scanner in a CAR download. See the next section
entitled “Viewing CAR data” for procedures.
No Dump

when selected, does not allow the capture of data for
saving or review. This is the normal operating mode.
Dump Job

captures only data between Start/End transmission
characters.
Dump All

captures all data received by the scanner CAR port.
NOTE: If you use the Dump Job option or Dump All option to open the
View Dump dialog box, and the dialog box is subsequently
closed, you must reopen the dialog box by selecting the View
Dump menu option.
Viewing CAR data The CAR menu allows you to view the data that is sent by the host
computer to the scanner in a CAR download.
1. Select Download>View Dump… The View Dump dialog box will be
displayed with the CAR data:
NOTE: Unprintable ASCII characters, such as Start of Text, are
shown as in the View Dump dialog box.
2. Select Save… if you want to save the file to send to Kodak or your
integrator for analysis or select Clear to clear the screen and
perform another download.
3. Click OK.