Kodak I7300 - Manual (Page 40)

A-61133 March 2003 2-35
Scan Area

determines the area of the film that the image processing
settings are applied to.
•
Primary

image processing settings are applied to the entire
image area that is defined in the Application Setup. This is the only
option available for non-duplex processing.
Front and Back are available when Duplex Processing is enabled.
•
Front

image processing settings are applied to only the front side
of the image.
•
Back

image processing settings are applied to only the back side
of the image.
Duplex Processing

provides the option of arranging the front and
back sides of an image from duplex film vertically rather than
horizontally.
•
None

disables Duplex Processing.
•
Manual

to initially define the front and back areas. When Manual
is selected, the image area defined in Application Setup will be
displayed in the Duplex Processing dialog box.
•
Automatic

uses the last specified manual setting to automatically
display all images in duplex processing view. This is useful when all
images on the film are the same size.
For procedures on using Duplex Processing, see the section entitled,
“Setting Manual and Automatic duplex processing” in Chapter 3.