Kohler Command Pro CV980 - Manual (Page 79)

8.3
Section 8
Disassembly
8
3. Remove the lower mounting screw and pull the
˜’•ȱꕕȱž‹Žȱ˜žȱ˜ȱ‘ŽȱŒ›Š—”ŒŠœŽǯ
Figure 8-7. Removing Oil Fill Tube.
Remove Electric Starter Motor
1. Disconnect the leads from the starter.
ȱ Řǯȱ Ž–˜ŸŽȱ‘Žȱ ˜ȱ‘Ž¡ȱ̊—ŽȱœŒ›Ž œȱŠ—ȱœŠ›Ž›ǯȱ
ŽŽȱ’ž›ŽȱŞȬŞǯ
Figure 8-8. Removing Electric Starter.
Remove Air Cleaner Assembly
1. Disconnect the breather hose from the air cleaner,
and the formed vent hose from the vent port on
the carburetor.
ȱ Řǯȱ Ž–˜ŸŽȱ‘Žȱ˜ž›ȱ‘Ž¡ȱ̊—Žȱ—žœȱŠ—ȱ›˜ž—ȱ•ŽŠȱ
›˜–ȱ‘Žȱ–˜ž—’—ȱœžœǯȱŽŽȱ’ž›ŽȱŞȬşǯȱ
Figure 8-9. Air Cleaner Mounting Details.
3. Remove the two screws securing the air cleaner
and main control bracket to the intake manifold
‹˜œœŽœǯȱŽŽȱ’ž›ŽȱŞȬŗŖǯ
Figure 8-10. Mounting Screws.
4. Remove the air cleaner from the engine as an
ŠœœŽ–‹•¢ǯȱŽŽȱ’ž›ŽȱŞȬŗŗǯ
Figure 8-11. Removing Air Cleaner Assembly.
Oil Fill Tube
Lower Mounting
Screw Location
Mounting
Screws
Breather
Hose
Mounting Nuts Vent Hose
Ground Lead
Mounting Screws