Kohler Command Pro CV980 - Manual (Page 78)

8.2
Section 8
Disassembly
Cylinder Shroud
Shut Off Fuel Supply
Drain Oil from Crankcase and Remove Oil
Filter
ȱ ŗǯȱ •ŽŠ—ȱ‘Žȱ˜’•ȱꕝŽ›ȱŠ—ȱ‘˜žœ’—ȱŠ›ŽŠǯȱŽ–˜ŸŽȱŠ—ȱ
’œŒŠ›ȱ‘Žȱ˜’•ȱꕝŽ›ǯȱŽŽȱ’ž›ŽȱŞȬŘǯ
Figure 8-2. Removing Oil Filter.
2. Remove the dipstick and one of the oil drain
plugs.
Figure 8-3. Removing Dipstick from Tube.
Figure 8-4. Oil Drain Plug Location.
3. Allow ample time for the oil to drain from the
crankcase.
5HPRYH0XIÀHU
ȱ ŗǯȱ Ž–˜ŸŽȱ‘ŽȱŽ¡‘Šžœȱœ¢œŽ–ȱŠ—ȱŠĴŠŒ‘’—ȱ
hardware from the engine.
Remove Cylinder Shrouds and Blower
Housing
1. Remove the top mounting screw and loosen the
 ˜ȱœ‘˜ž•Ž›ȱœŒ›Ž œȱ˜—ȱŽŠŒ‘ȱœ’Žǯȱ’Ğȱ˜ěȱ‘Žȱ ˜ȱ
Œ¢•’—Ž›ȱœ‘›˜žœǯȱŽŽȱ’ž›ŽȱŞȬśǯ
Figure 8-5. Removing Cylinder Shrouds.
2. Remove the four mounting screws and separate
the blower housing from the backing shroud
ŠœœŽ–‹•¢ǯȱ—ŽȱœŒ›Ž ȱŠ•œ˜ȱœŽŒž›Žœȱ‘Žȱ˜’•ȱꕕȦ
’™œ’Œ”ȱž‹ŽǯȱŽŽȱ’ž›ŽȱŞȬŜǯȱ‘Žȱę¡ŽȱžŠ›ȱ
(equipped models) may be removed with the
blower housing.
Figure 8-6. Removing Blower Housing.
Drain Plug
(Starter Side Shown)
Mounting
Screws