Section 7 electrical system and components – Kohler Command Pro CV980 User Manual
Page 51

7.1
7
Section 7
Electrical System and Components
This section covers the operation, service, and repair
of the electrical system components. Systems and
components covered in this section are:
•
Spark Plugs
ȱ Ȋȱ Ĵ¢ȱȱȱ¢
•
Electric Starter
ȱ Ȋȱ ȱȱ¢ȱǻȱȱǼȱ
Spark Plugs
ȱęȱȱȱȱȱĞȱȱ
¢ȱȱȱȱȱȱȱȱȱȱȱȱ
condition.
The engine is equipped with the following spark
plugs:
Type:
ȱȱȱȱȱȱ
®
ŗŖȱǻ
ȱȱǯȱŜŘȱŗřŘȱŖŚȬǼǯȱ
ȱȱȱȱȱȱȱ
used.
Gap:
ŖǯŝŜȱȱǻŖǯŖřŖȱǯǼ
Thread Size:ȱ
ŗŚȱ
Reach:
ŗşǯŗȱȱǻřȦŚȱǯǼ
Hex Size:ȱ
ŗśǯşȱȱǻśȦŞȱǯǼ
Spark Plug Service
Every 200 hours of operation, remove each spark
ǯȱȱȱȱȱȱȱȱȱȱ
replace with a new plug as necessary. Replace spark
plugs every 600 hours. To service the plugs, perform
the following steps:
ȱ ŗǯȱ ȱȱȱȱǰȱȱȱȱ
ȱȱȱȱȱȱȱȱȱȱ
ȱȱȱȱǯ
ȱ Řǯȱ ȱȱȱȱȱȱǯȱȱ
“Inspection” following this procedure. Replace
the plug if necessary.
DZȱ ȱȱȱȱȱȱȱȱ
ȱȱǯȱȱȱȱ
remain in the spark plug and enter the
engine causing extensive wear and
damage.
řǯȱ ȱȱȱȱȱ ȱȱǯȱȱ
the gap to 0.76 mm (0.030 in.)ȱ¢ȱ¢ȱ
ȱȱȱǯȱȱȱŝȬŗǯ
Figure 7-1. Servicing Spark Plug.
ȱ Śǯȱ ȱȱȱȱȱȱ¢ȱȱ
and torque to ŘŚǯŚȬŘşǯŞȱȉȱǻŗŞȬŘŘȱĞǯȱǯǼ.
Inspection
Inspect each spark plug as it is removed from
the cylinder head. The deposits on the tip are an
indication of the general condition of the piston rings,
ǰȱȱǯ
ȱȱȱȱȱ ȱȱȱ ȱ
photos:
Wire Gauge
Spark Plug
Ground
Electrode
0.76 mm
(0.030 in.) Gap