Paper skewing, Printer output is banding (horizontal) – Kodak NOVAJET 700 User Manual
Page 99
Troubleshooting
4-9
NovaJet 500/630/700 Series Service Manual
Symptoms
Possible cause
Solution
Table 4-1. Troubleshooting Table (cont).
TROUBLE-
SHOOTING
Paper Skewing
• paper guides not
install paper
installed
guides
• stepper motor
perform Clean and
gearing dirty or
Inspect Stepper
damaged
Motor Gears
procedure
• lower roller
tighten screws
loose
securing lower roller
Printer Output
is Banding
(Horizontal)
• if banding is
1) inspect and/or
consistent
replace stepper
motor (perform
Stepper Motor
Winding Resistance
Check)
2) inspect and/or
replace stepper
motor gears and/or
lower roller
assembly
3) replace MPCB
• check amount
replace or refill
of ink in cartridges
cartridges
• cartridges need
perform Prime
to be primed
This manual is related to the following products: