Kodak NOVAJET 700 - Manual (Page 129)

NovaJet 500/630/700 Series Service Manual
ASSEMBL
Y
/
DISASSEMBL
Y
Assembly\Disassembly 5-17
Figure 5-9. Cooling Fan/AC Entry Module Removal.
8. Using a 1/4” wrench or socket, disconnect the AC Entry Module
ground from the ground stud on the Right Baseplate.
9. Remove the AC Entry Module by pressing in on the securing tabs
until the module is released.
Install the Power Supply, Cooling Fan, and AC
Entry Module
To install the Cooling Fan and AC Entry Module:
1. Insert the AC Entry Module into the AC Entry Module hole on the
Right Baseplate from the back of the printer. Press in until it snaps
securely into place.
2. Attach the AC Entry Module ground connection to the grounding
stud on the Right Baseplate.
3. Hold the Cooling Fan into place while inserting the four bolts into
the assembly. Attach the four 1/4” nuts to the bolts to secure Fan
assembly. Torque to 4 in-lbs.