Media feed motor not operating, sensor works, Media feed or take-up sensor(s) not operating – Kodak NOVAJET 700 User Manual
Page 105
Troubleshooting
4-15
NovaJet 500/630/700 Series Service Manual
Symptoms
Possible cause
Solution
Table 4-1. Troubleshooting Table (cont).
TROUBLE-
SHOOTING
Media Feed
Motor Not
Operating,
Sensor Works
• bad connection
reconnect Feed
to the motor
motor
• bad Feed motor
Replace Feed
motor
• faulty wiring leg
reseat or replace
harness
leg harness
• bad MPCB
replace MPCB
Media Feed and
Take-Up Motors
Not Operating,
Both Sensors
Working
• printer is in
put in Take-Up
Sheet Mode
Mode (to activate
both) or Roll Mode
(to activate feed
motor only),
(under “Supply
Type” from
“Paper Option
Menu”)
Media Feed or
Take-Up Sensor(s)
Not Operating
• reflective decal
clean decal and/or
is dirty or blocked
clear obstruction
• reflective decal
replace reflective
missing
decal
This manual is related to the following products: