Kodak NOVAJET 700 - Manual (Page 69)

NovaJet 500/630/700 Series Service Manual
MAINTENANCE
Maintenance 3-27
The “Current Heads (Y, M, C)” view represents the alignment of the
heads as they are currently entered. This is just an overview of all
heads and how they are aligned. Do not attempt to align the heads
using this view.
The “Color Horizontal Head-to-Head Calibration” checks the alignment
of the nozzles horizontally and allows corrections when required. Just
enter the value below the set of lines that are correctly aligned. Be
careful that you are aligning the correct color by observing the C (cyan),
M (magenta), and Y (yellow) on the right side of the plot.
The “Color Vertical Head-to-Head Calibration” checks the alignment of
the nozzles vertically and allows corrections when required. Just enter
the value below the set of lines that are correctly aligned. Be careful
that you are aligning the correct color by observing the C (cyan), M
(magenta), and Y (yellow) on the right side of the plot.
To perform the Color Calibration:
1. Select “Utility Menu” from the Main Menu. This brings up the
Utility Menu as shown in Figure 3-19.
Prime
Access Cartridge
Color Calib Menu
Calibration Menu
Display Settings
Print Settings
Service Menu
Exit
*
Figure 3-20. Utility Menu.