Kodak NOVAJET 700 - Manual (Page 168)

5-56 Assembly\Disassembly
NovaJet 500/630/700 Series Service Manual
Remove the Thermal Dryer Assembly (NovaJet
750)
WARNING
Once the dryer is plugged in, there is continuous power
being applied to the dryer, even when the printer is
turned off.
DISCONNECT POWER CORD BEFORE SERVICING!
WARNING
This assembly emits heat by radiation.
1. Disconnect the Thermal Dryer Assembly power cord from the back
of the printer.
2. Disconnect the data cable from the right side of the Thermal Dryer
Assembly.
3. Locate and remove the four screws securing the Thermal Dryer
Assembly to the support brackets. Gently lift the Dryer Assembly
off the support brackets. See Figure 5-30.