Kodak NOVAJET 700 - Manual (Page 54)

3-12 Maintenance
NovaJet 500/630/700 Series Service Manual
Servo Motor Winding Resistance Check
Figure 3-7. Servo Motor.
1. Disconnect the servo motor connection from J2 on the MPWA.
2. Using a standard ohmmeter or multimeter, connect the meter
leads to the two wires going to the motor.
3. While manually rotating the servo motor, monitor the readings
on the meter. The acceptable range is 6-30 ohms. Typically,
the reading is 7-11 ohms.
4. If the measurement is found to be unsatisfactory, replace the
servo motor.