Kodak NOVAJET 700 - Manual (Page 23)

General Description 1-7
NovaJet 500/630/700 Series Service Manual
GENERAL
DESCRIPTION
Chapter 2 THEORY OF OPERATION - Functional
descriptions of the overall printer and major assemblies
are contained in this chapter.
Chapter 3 MAINTENANCE - This chapter covers the
scheduled maintenance, cleaning procedures and
alignment/adjustments recommended to perform on the
printers. Diagnostics and a signal flow diagram are also
listed.
Chapter 4 TROUBLESHOOTING - A table containing
problems that could occur and possible causes and repairs
is found in this chapter. This table is not intended to be a
complete listing of troubleshooting procedures. It will
isolate the problem down to the lowest replacable
assembly. If the problem happens to be the wiring
between assemblies, standard troubleshooting techniques
will have to be implemented to correct the problem.
Chapter 5 ASSEMBLY/DISASSEMBLY - Contains detailed
procedures to remove and replace printer parts and
assemblies.
Chapter 6 PARTS LIST - Contains a complete listing of all
field replacable parts and assemblies for the NovaJet 500/
630/700 Color Inkjet Printers. Illustrated parts
breakdown drawings are included to help clarify and
identify parts for ordering. Special kits and adjustment
jigs may also be required.
ORIENTATION - Instructions in this manual are based on the
assumption that the service person is facing the front of the printer.
References to top view, back view, and so forth are consistent with
this engineering standard. References to the X Axis and Y Axis
(Paper Axis and Carriage Axis, respectively) follow the standard of
AutoCAD™ absolute coordinates: up and down for X, left to right for
Y.