Kodak NOVAJET 700 - Manual (Page 160)

5-48 Assembly\Disassembly
NovaJet 500/630/700 Series Service Manual
It may be necessary to loosen (do not remove) the screws
that secure the Y-Arm Assembly to the Platen so that the
Lower Drive Roller Assembly clears the ends of the screws
that protrude inside of the Platen while installing the
Lower Drive Roller Assembly.
It may be necessary to loosen (do not remove) the screws
that secure the left Leg Assembly to the Platen so that
the Lower Drive Roller Assembly clears the ends of the
screws that protrude inside of the Platen when removing
the Lower Drive Roller Assembly.
NOTE
Ensure that the Lower Drive Supports and Fan Assem-
blies are oriented in the correct position before inserting
into the Platen.
3. Slide the right side of the Lower Drive Roller Assembly inside of the
left side of the Platen until the first roller is inserted.
4. Position and hold one of the Fan Assemblies under the Lower Drive
Roller Assembly and between the first and second rollers. Continue
to insert the Lower Drive Roller Assembly into the Platen.
5. Position and hold the other Fan Assembly (for 60 inch model only)
under the Lower Drive Roller Assembly and between the seventh
and last rollers. Continue to insert the Lower Drive Roller Assembly
completely into the Platen.