Kodak NOVAJET 700 - Manual (Page 117)

NovaJet 500/630/700 Series Service Manual
ASSEMBL
Y
/
DISASSEMBL
Y
Assembly\Disassembly 5-5
To remove the Left Cover Assembly (NovaJet 750 version):
10. Disconnect and remove all ink reservoirs.
Figure 5-3. Left Cover Removal/Installation (NovaJet 750).
11. Remove the two screws securing the Left Cover to the Left Frame.
See the upper portion of Figure 5-3.
12. Reach under the Support Bracket and depress and hold the
retracting stop assembly that secures the Left Cover to the
Support Bracket.
13. Insert the tip of a flathead screwdriver into the gap between
theLeft Cover and the Left Frame as shown in the lower portion of
Figure 5-3 and twist. Insert and twist into as many gaps as
necessary to loosen the cover from the frame.
14. Carefully lift the Left Cover up and off the printer.