Troubleshooting, Introduction, No power – Kodak NOVAJET 700 User Manual
Page 91
4
4-1
TROUBLE-
SHOOTING
Troubleshooting
No Power
• printer not ON
depress power
switch
• faulty power
replace power cord
cord
• AC input not
replace AC entry
present at power
module
supply
Introduction
Chapter 4, Troubleshooting consists of a table that is intended to aide
the technician in troubleshooting the Novajet 500/630/700 Series
printers. This table addresses symptoms with their possible causes
and solutions.
Basic troubleshooting skills will be required to perform the symptom
identification, troubleshooting, fault isolation, and repair of the printer
when using this table.
Ensure that all applicable software diagnostic tests have been properly
executed, all visual indications (including LED status) have been
observed, and all applicable pushbuttons have been depressed to obtain
a complete list of symptoms to be applied to the table below.
Use the table in conjunction with Chapter 3, Maintenance, whenever
the table prompts you for additional information. This information
may be in the form of an illustration, additional data, or a procedure
that needs to be performed.
Table 4-1. Troubleshooting Table.
Symptoms
Possible cause
Solution