Samsung GALAXY S SGH-T989D - Manual (Page 190)

182
2. Tap Select device administrators to begin configuring this
setting.
3. Select an administrator device and follow the prompts.
Credential Storage
This option allows certain applications to access secure
certificates and other credentials. Certificates and credentials can
be installed to the SD card and password protected.
1. Press  and then tap (Settings) 
Location and security.
2. Tap Use secure credentials to activate this feature. A check
mark displayed next to the feature indicates secure
credentials is active. This option is only active when
credentials have been installed.
3. Tap Install from USB storage to install encrypted certificates
from the USB Storage location.
4. Tap Set password to set or change the credential storage
password.
5. Tap Clear storage to clear all certificates and credentials
from the SD card or phone memory and reset the
credentials password.
Applications
This phone can be used for Android development. You can write
applications in the SDK and install them on this device, then run
the applications using the hardware, system, and network.
The settings in this section allow you to configure the device for
development.
Unknown Sources
This feature must be enabled in order to download applications
from locations other than the Android Market.
1. Press  and then tap (Settings) 
Applications.
2. Tap Unknown sources to active this feature.
Note: If you are notified that you can not download a Market application
because it comes from an “Unknown source”, enabling this option
corrects this issue.
Manage Applications
This feature allows you to manage your phone’s applications.
You can also view the amount of memory or resources used as
well as the remaining memory and resources for each of the
applications on your phone, and clear the data, cache, or defaults.