Samsung GALAXY S SGH-T989D - Manual (Page 183)

Changing Your Settings 175
Note: The Phone vibrate setting is independent of other call sounds settings.
For example, if you have Silent mode enabled along with vibrate, your
phone won’t play a ringtone, but will vibrate for an incoming call.
Volume
The Volume menu provides access to various volume settings
within one on-screen popup menu.
1. Press  and then tap (Settings) 
Sound  Volume.
2. Touch and drag the on-screen slider to assign the volume
settings for any of the following volume levels.
• Incoming call, Media, System, or Notification.
3. Tap OK to assign the volume levels.
Vibration Intensity
1. Press  and then tap (Settings) 
Sound.
2. Tap Vibration intensity.
3. Tap and drag the sliders for Incoming call, Notification
and Haptic feedback to change the vibration intensity for
each type of alert.
4. Tap OK.
Phone Ringtone
To select a voice call ringtone:
1. Press  and then tap (Settings) 
Sound.
2. Tap Phone ringtone.
3. Tap a ringtone from the available list. The ringtone briefly
plays when selected.
4. Tap OK to assign a ringer.
Notification Ringtone
1. Press  and then tap (Settings) 
Sound  Notification ringtone.
2. Tap one of the ringtones and tap OK.
Audible Tone Settings
The Audible touch tones and Audible selection options are used to
select the sounds made when you use the dialing pad or make a
screen selection. Each time you press a key or make a selection
the selected tone sounds.
1. Press  and then tap (Settings) 
Sound.