Assigning ip addresses automatically, Windows xp – Siemens 108 User Manual

Page 95

Appendix

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / appendix.fm / 23.12.2005

plat

e 20

05_0

5_02

Assigning IP addresses automatically

Your Gigaset WLAN Repeater 108 has a DHCP server that automatically assigns
addresses in the network. As a rule, you do not have to do anything, as the Obtain an
IP address automatically function field is set during the installation of TCP/IP. If, how-
ever, you integrate your Gigaset WLAN Repeater 108 in an existing network with static
address blocks, domain names or subnets or if you cannot launch the configuration pro-
gram straight away, you should check the TCP/IP properties and make any necessary
changes. This is described below.

Windows XP

Click on Start and select Control panel.

Select Network and Internet Connections, then click on the Network Connec-
tions icon.

Double-click on the LAN connection with which you are connected to the Gigaset
WLAN Repeater 108.

Click on Properties.

Select Internet protocol (TCP/IP) and once again click on Properties.