Siemens 108 User Manual

Page 45

Security Setup Wizard

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / security_config.fm / 23.12.2005

plat

e 20

05_0

5_02

Entering MAC addresses manually

Enter the MAC address of the network adapter. You will find this address on the bot-
tom of the device.

Enter the name of the PC.

Click on the Add button to add the entry to the list.

Selecting from the list of logged-in PCs

Select the required PC from the Known wireless clients list. All PCs are displayed
that are currently logged in to the router.

Click on the Add button to add the selected PC to the list.

To go to the next step, click on Next >.

Please remember:
If you activate MAC access control, you must at least enter the PC from which you
are configuring the Gigaset WLAN Repeater 108. Otherwise you will no longer be
able to access the user interface and a corresponding error message will be
shown.
If, by mistake, you have denied all PCs access to the Gigaset WLAN Repeater 108
you have two choices:

You can completely reset the Gigaset WLAN Repeater 108 (see page 11).

You can connect a PC to the Gigaset WLAN Repeater 108 using one of the LAN
connections (by cable). As MAC access control only applies to PCs that are con-
nected "wirelessly", you can use this PC to change the configuration.