Siemens 108 - Manual (Page 13)

11
First Steps
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / first_steps.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
Back panel
The back panel of the Gigaset WLAN Repeater 108 houses the following sockets.
Reset
The reset button is located behind the small opening on the underside of the device.
u Restart function: Press the reset button for longer than 1 second but less than
5 seconds to reboot the device. This does not affect the configuration settings.
The WLAN LED flashes while the device restarts. This may take several minutes.
u Reset function: Press the button behind the small opening on the underside of the
device for at least 5 seconds to return all settings to the factory settings.
Warning: This will clear all the configuration settings you have made.
Updated firmware will not be affected.
Element Description
5VDC Socket for the mains adapter supplied
Please note:
Using the wrong power supply unit may damage the repeater.
LAN Socket for an Ethernet cable
Please note:
While the device is rebooting the reset button does not function. To trigger the restart
or reset function, please wait until the WLAN LED has stopped flashing.