Siemens 108 User Manual
Page 114
112
Appendix
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / appendix.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
You cannot access
the Gigaset WLAN
Repeater 108 from
a PC, for example to
call the configura-
tion program (con-
nection via LAN
cable).
The connection
between PC and the
Gigaset WLAN
Repeater 108 is inter-
rupted. The LED for
the LAN socket does
not light up.
ì
Check the cable connection
(see above).
The PC's network
settings are wrong.
ì
Make sure that the PC has the right
configuration for connecting to the
Gigaset WLAN Repeater 108, for
example that the IP address and
subnet mask have been set correctly
or the obtaining the IP address auto-
matically has been activated (see
page 93).
Your PC is configured
to automatically
obtain IP addresses,
but the DHCP server
of your Gigaset WLAN
Repeater has been
switched off.
ì
Manually assign a static IP address
for your PC in the Gigaset WLAN
Repeater 108 (see page 100)
address block.
The IP address of your
Gigaset WLAN
Repeater 108 has
changed as you have
activated the
Obtained automati-
cally option (see
page 47).
ì
Check the log of your DHCP server,
from which the Gigaset WLAN
Repeater 108 obtained its IP
address, to see which IP address was
assigned to it and enter this address
in your browser. Try resetting your
Gigaset WLAN Repeater 108 to the
factory settings to once again obtain
access via address 192.168.2.254
(see page 11).
Problem Possible
cause
Remedy