Siemens 108 User Manual

Page 59

Configuring the Advanced Settings

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / advanced_config.fm / 23.12.2005

plat

e 20

05_0

5_02

WPA and WPA2 with authentication server (Access point Operating mode only)
In large networks (e.g. in companies) WPA enables the use of an additional authentica-
tion service. In this case, user access is controlled by user accounts and passwords, in
addition to WPA encryption. A RADIUS server acts as an authentication server. You can
select the new standard WPA2, if this is supported by all components in your wireless
network, or select WPA2 / WPA, if you are using devices that only support WPA.

Select the required option in the Security field.

Enter the IP address of the RADIUS server in the RADIUS server IP address field.

Enter the port of the RADIUS server in the RADIUS server port field.

In the RADIUS server secret key field, enter a key conforming to the conventions of
the RADIUS server, which is to be used by the server for authentication.

Click on OK to apply the settings.