Siemens 108 User Manual

Page 116

114

Appendix

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / appendix.fm / 23.12.2005

plat

e 20

05_0

5_02

You cannot access
the Gigaset WLAN
Repeater 108 from
a PC, for example to
call the configura-
tion program (wire-
less connection via
WLAN).

You are not con-
nected to the Gigaset
WLAN Repeater 108.

Make sure you are properly
connected to the Gigaset WLAN
Repeater 108. Check the parameters
in the Gigaset WLAN Adapter Moni-
tor.

The PC's network set-
tings are wrong.

Make sure that the PC has the right
configuration for connecting to the
Gigaset WLAN Repeater 108, for
example that the IP address and
subnet mask have been set correctly
or the obtaining the IP address auto-
matically has been activated (see
page 93).

Your PC is configured
for the automatic
obtaining of IP
addresses, but the
DHCP server of your
Gigaset WLAN
Repeater 108 has
been switched off.

Manually assign a static IP address
for your PC in your Gigaset WLAN
Repeater 108 address block (see
page 100).

The IP address of your
Gigaset WLAN
Repeater 108 has
changed as you have
activated the
Obtained automati-
cally option (see
page 47).

Check the log of your DHCP server,
from which the Gigaset WLAN
Repeater 108 obtained its IP
address, to see which IP address was
assigned to it and enter this address
in your browser. Try resetting your
Gigaset WLAN Repeater 108 to the
factory settings to once again obtain
access via address 192.168.2.254
(see page 11).

The Gigaset WLAN
Repeater 108 does
not work properly
in Repeater Operat-
ing Mode.

The repeater function
on the Gigaset WLAN
Repeater 108 or on
the access point is
not activated.

Make sure that the repeater func-
tion has been activated on both your
Gigaset WLAN Repeater 108 and
your access point (see page 47) or
read the corresponding chapter in
your access point's manual).

Problem Possible

cause

Remedy