Siemens 108 - Manual (Page 15)

13
First Steps
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / first_steps.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
Connecting the Gigaset WLAN Repeater 108
Set up the Gigaset WLAN Repeater 108 at the required location.
To a wired network (LAN), a PC, a games console or a modem
ì
Plug one end of the Ethernet cable
into the socket marked LAN on the
Gigaset WLAN Repeater 108.
ì
Plug the other end of the Ethernet cable
into the device to which you wish to
connect the Gigaset WLAN Repeater
108.
Depending on the particular applica-
tion, this could be a router, a PC, a
games console or a DSL/cable modem.
Please note:
Depending on the use, you will first have to make some settings via the browser-based
configuration program of your Gigaset WLAN Repeater 108. We therefore recommend
that you first connect the device to a PC using an Ethernet cable.
Wirelessly to a PC
A wireless connection is made using a wireless network adapter that must be installed
in your PC.
A wireless network is defined by assigning
an identical SSID to all the devices. The
default SSID of the Gigaset WLAN Repeater
108 is ConnectionPoint.
ì
Therefore, enter ConnectionPoint as
the SSID on the wireless network
adapter in your PC, and deactivate
encryption if necessary. The user guide
belonging to the device will tell you
how to do this.
If the correct SSID has been entered in your
PC's wireless network adapter, the wireless
link will be established automatically
once you connect your Gigaset WLAN
Repeater 108 to the mains power supply.
)))
)))
(((