Siemens 108 - Manual (Page 46)

44
Security Setup Wizard
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / security_config.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
Saving settings
On the next screen you conclude the wizard and save the settings. You will be informed
of any security risks that still exist.
ì
Click on Finish to close the wizard and to save the settings.
If you have changed the default settings, the device is restarted.
Please remember:
u If you have activated encryption, the wireless connection will be blocked until you
enter the appropriate key in the other devices on the network. Please consult the
operating instructions for the network adapter.
u If you use the Gigaset WLAN Repeater 108 in Repeater or Ethernet adapter
Operating Mode, the set keys must match those in the access point. If an error is
made, you no longer have access to the wireless network. If you do not immedi-
ately run the Security Setup Wizard settings for an access point with encryption
or the keys or the encryption type do not match, the PC cannot connect to the
Gigaset WLAN Repeater 108. This is because there is then no accessible DHCP
server or PC and repeater have no static IP addresses. In this case, you must return
the Gigaset WLAN Repeater 108 to the factory settings (see section "Reset" on
page 11) and run the Basic Setup Wizard again.