Siemens 108 - Manual (Page 19)

17
The user interface
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / basic_config.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
A screen with security information is displayed.
For the initial configuration you can skip this information. If you carry out all the basic
and security settings using the wizard as described below, then your device and network
are fully protected. If not, the next time you log on you will be informed of security gaps
in the configuration program.
ì
Click on OK.
You will now see the start screen.
The start screen
The start screen is the starting point for all configuration and administration activities.
Start screen functions
On the start screen you can
u select the language for the user interface (see page 19),
u call up the Basic Setup Wizard (see page 21),
u call up the Security Setup Wizard (see page 35),
u open the Advanced Settings menu for additional configuration options
(see page 45),
u open the Status menu to obtain status information about the Gigaset WLAN
Repeater 108 (see page 72).
You can call up the wizards, the Advanced Settings menu, and status information from
any other configuration program screen at any time via the tabs on the upper edge of
the user interface.