Siemens 108 User Manual
Page 117
115
Appendix
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / appendix.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
The repeater configu-
ration of the Gigaset
WLAN Repeater 108
or your access point is
wrong.
ì
Make sure that the correct access
point has been selected on your
Gigaset WLAN Repeater 108 and the
correct Gigaset WLAN Repeater 108
on your access point (see page 47)
or read the corresponding chapter in
your access point's manual). Make
sure that you use the MAC address
to identify the devices when there
several devices with the same SSID.
The radio channel of
the Gigaset WLAN
Repeater 108 does
not correspond to the
radio channel of the
access point.
ì
Make sure that the radio channels
on the devices are the same (see
page 51) or read the corresponding
chapter in your access point's man-
ual).
You notice that
unauthorised per-
sons have accessed
your data/comput-
ers.
The security precau-
tions are inadequate.
ì
Boost your security precautions. To
find out how to do this, please read
Chapter "Local Network" on
page 47.
Some steps are not
appropriate, the
problem still exists.
New firmware may
be available for the
Gigaset WLAN
Repeater
ì
Download the new firmware from
the Gigaset WLAN Repeater 108
product page on our web page and
load it onto your device (see
page 69).
Problem Possible
cause
Remedy