Siemens 108 - Manual (Page 34)

32
Basic Setup Wizard
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / basic_config.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
Local network settings
In the next step, you will see the screen for the basic settings of your local network.
ì
In IP address type, specify whether the Gigaset WLAN Repeater 108 should obtain
its IP address automatically from an external DHCP server in the network or not.
– If you want to use a static IP address for your Gigaset WLAN Repeater 108 (factory
setting for the IP address is 192.168.2.254), select the Static option and enter the
IP address and subnet mask in the fields underneath. Make sure that the IP
address you assign complies with the conventions for private IP addresses
described on page 100.
– Normally you do not have to change the option for the IP address type. If your
Gigaset WLAN Repeater 108 shall obtain its IP address automatically from a DHCP
server in your network, please select the Obtained automatically option.