Siemens 108 - Manual (Page 14)

12
First Steps
Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / first_steps.fm / 23.12.2005
Te
m
plat
e 20
05_0
5_02
Setting up the Gigaset WLAN Repeater 108
The Gigaset WLAN Repeater 108 can be set up in any suitable location in the home or
office. You do not need any special wiring. However, you should comply with the follow-
ing guidelines:
u Operate the Gigaset WLAN Repeater 108 only indoors within a temperature range
of +5 to +40 °C. Do not position the Gigaset WLAN Repeater 108 near sources of
heat. Do not cover the ventilation slots. High temperatures will reduce the transmit-
ter range.
u A suitable mains socket and a connection to the Ethernet socket of a PC or a wired
network must be available where you set up the Gigaset WLAN Repeater 108.
u Do not position the device in the immediate vicinity of stereo equipment, TV sets or
microwave ovens. This may cause interference.
u Position the Gigaset WLAN Repeater 108 on a non-slip surface.
The router feet do not normally leave any traces on the surface they are on. How-
ever, some furniture surfaces may contain substances that attack and soften the
router's plastic feet. This may cause the feet to mark the furniture surface.
u Position the Gigaset WLAN Repeater 108 in such a way that it cannot fall down and
damage the antenna.
u Do not place the Gigaset WLAN Repeater 108 on a heat sensitive surface.
u Lay the cables so that nobody can trip over them. You should not cover the cables
with anything.
u Protect the Gigaset WLAN Repeater 108 from dampness.