Sun Microsystems 6.0005E+11 - Manual (Page 93)

I/O Boards and Components 3-21
3
3.5.4.1 Plastic Standoffs
Plastic standoffs lock the SBus and graphics (UPA) cards to the I/O boards. See
Figure 3-14.
•
To unlock a standoff, pull up the tip insert.
•
To lock a standoff, first ensure that the module or card rests on the standoff
flange, then press down the tip insert.
Figure 3-14 Locking and Unlocking Standoffs
3.5.4.2 Removing an SBus Card
1. Use the procedures in Section 3.5.2, “Removing a Board,” to
remove the applicable I/O board.
2. Use Figure 3-13 to locate the card to be removed.
Unlocked Locked
Standoff
Tip insert
Flange
Standoff
SBus/graphics (UPA) cards