Figure314 ejecting a simm, 2 installing a memory module, Requirements – Sun Microsystems 6.0005E+11 User Manual

Page 69: Figure 3-14, Ejecting a simm

Text mode
Original mode

CPU/Memory Boards and Components

3-21

4. Eject the faulty SIMM by pressing down on the ejection levers on both

sides of the SIMM connector.
See Figure 3-14.

Figure 3-14

Ejecting a SIMM

5. Holding the SIMM by its edges, remove it from the slot and place it on an

antistatic surface.

3.4.5.2 Installing a Memory Module

Requirements

All banks must have the same size SIMMs, however, SIMMs from different
manufactures are interchangeable in a single bank if the SIMMs all have the
same capacity and speed. Sort the SIMMs into banks of 8 using the same size
SIMMs.