2 removing the external cables, Position the server for easy access to the rear, 2 removing the external cables -5 – Sun Microsystems 6.0005E+11 User Manual

Page 197: Figure 12-4, Or figure 12-4 (standalone), Removing the external cables

Text mode
Original mode

Powering Off and On

12-5

Figure 12-4 AC Power Switch and Power Receptacle

(Standalone Server)

12.2 Removing the External Cables

1. Position the server for easy access to the rear.

2. Enterprise 6000/5000 systems only: remove the rear screen panel and the

kick panel by loosening the screws.
Both the rear screen panel and kick panel are attached with two screws. See
Figure 12-5.

Note – If your system cabinet has a hinged rear door, use the sliding door latch
to open the door, remove the kick panel (if necessary), and proceed to Step 3.

AC power switch

AC connector