5 rear screen panel, Figure123 removing the rear screen panel, 5 rear screen panel -6 – Sun Microsystems 6.0005E+11 User Manual

Page 210: Figure 13-3, Removing the rear screen panel

Text mode
Original mode

12-6

Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996

12.3.5 Rear Screen Panel

To remove the rear screen panel:

1. Remove the two #10 Phillips screws securing the panel to the frame.

See Figure 12-3.

2. Tilt the panel top out and lift it free of the chassis. Set the panel aside.

There is a flange on the bottom of the rear screen.

Figure 12-3 Removing the Rear Screen Panel

Note – If your cabinet has a hinged rear door, remove the pins from the hinges
and lift the door free of the chassis. Reverse this procedure to replace the door.

To replace the rear screen panel:

1. Insert the panel so the bottom flange engages behind the top of the kick

panel.

2. Tilt the panel flush against the frame and secure using Phillips screws.

#10 Phillips screws

Kick panel