Figure121 removing the front bezel, 4 front panels hinged door, 4 front panels hinged door -4 – Sun Microsystems 6.0005E+11 User Manual

Page 208: Figure 13-1, Removing the front bezel

Text mode
Original mode

12-4

Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996

Figure 12-1 Removing the Front Bezel

To replace the bezel:

♦ Place the bezel against the chassis with ball studs aligned with the catches

on the bezel, and tap or press both sides of the bezel into place.

12.3.4 Front Panels Hinged Door

To open the hinged door:

1. Grasp the door handle (purple extruded strip on vent edge) on the right

side of the first panel, and firmly pull toward you.
See Figure 12-2.

The door, which consists of three panels, is secured closed by clips and ball-
studs at the side opposite of the hinge. The door is released and swings
open if pulled firmly.