JVC VR-N1600E - Manual (Page 79)

71
ⅷ Other Settings
Item Preset Values Description
B Day and Time Properties To synchronize the time with the Internet time server or to specify the date
and time manually, click [Update Now].
Automatically
synchronize with an
Internet server Select check box
ⅷ Do not select
check box
Select this check box to synchronize the time with the Internet time server.
Note :
● You cannot specify the date and time manually when this box is
selected. The settings in the boxes cannot be changed.
● The date and time properties are not enabled until you have clicked
the [Update Now] button.
● Changing the time setting may prevent normal playback of recordings
made at the same time as a result.
● Changing the ATimeB field of the time setting when operations are in
progress may prevent normal display of live images. In this case,
reboot this unit.
Server ^ Enter the address of the Internet time server.
NTP Polling Interval ^ For specifying the time interval (in minutes) for synchronizing with the Internet
time server.
Date
^
Enter this field when you are specifying the date manually.
Memo :
● The [Day and Time Properties] settings are not enabled until you have
clicked the [Update Now] button.
● Changing the time setting may prevent normal playback of recordings
made at the same time as a result.
● Changing the B hourA value of the hour/minute/second setting when
operations are in progress may prevent normal display of the live
images. In this case, reboot this unit.
Time
Time Zone ⅷ VR-1600U:
(GMT-05:00)
Eastern Time
ⅷ VR-1600E:
(GMT) Greenwich
Mean Time
For specifying the time zone.
Note :
● Make sure that the date and time that you specify does not overlap
with any previous recorded data.
● If the specified time zone is incorrect, the system may not run at the
correct time after synchronizing with the Internet time server.
● When the time zone is altered, press the [LIVE/BROWSE] while
holding down the [FUNCTION] button to reboot the NVR Viewer.
C Volume Properties
Device Volume ⅷ Center position Adjust the volume using the slider bar.
D LOAD configuration ^ Reads the preset configuration files and displays them on the screen.
E SAVE changes ^ Exits after entries and the selected content are configured to the system.
Manual update of time is disabled. To update the time manually, go to the
[Day and Time Properties] item C.
F CANCEL changes ^ Exits without saving all entries and selected settings.
VR-N1600_J.book Page 71 Tuesday, June 3, 2008 2:26 PM