JVC VR-N1600E - Manual (Page 119)

111
This option enables you to specify the language you want to
use.
Memo :
● The functions and GUI (graphical user interface) are the
same as the [Selecting a language] (A Page 19) screen
that is displayed when this unit is first switched on.
1
Exit NVR Viewer
2
Select [Language Setting] from the main menu
● The [Language Setting] screen appears when the NVR
Viewer is switched on for the first time.
3
Select a language
● Click on the [Language Selection] pull-down tab and
select the language you want to use.
4
Click the [OK] button
● Click the [OK] button to enable your selection. The
system will reboot when the language setting is
changed.
Note :
● Specify the language settings immediately after this unit
has started up.
● When language setting is complete, the device
automatically reboots. It may take about five minutes to
exit the settings.
● Set the language after shutting down the NVR Viewer.
● Never turn off the power while setting the language.
Language Setting
3
4
[Language Selection] Screen
VR-N1600_J.book Page 111 Tuesday, June 3, 2008 2:26 PM