JVC VR-N1600E - Manual (Page 54)

46
Basic Operation
Deleting Temporary Files (Operation on
the Unit)
1
Select the temporary files you want to delete
from the data list.
2
Click the [Erase Sel Data] button
A [YES] or [NO] message asking you whether to delete the
selected data appears. Select
AYESB.
Deleting Data from a CD-RW (Operation
on the Unit)
1
Insert the CD-RW
● The [Erase RW] button is AenabledB.
2
Click the [Erase RW] button
● A [YES] or [NO] message asking whether you want to
delete data in the RW appears. Select AYESB.
Note :
● You cannot perform other operations while data is being
written to a CD/DVD.
● Recorded images may be omitted during writing to the
CD/DVD (temporary recording error).
● Do not display the Burn CD/DVD screen during export.
● Do not connect the CD/DVD drive while a media is
inserted.
● Do not disconnect the CD/DVD drive while the Burn CD/
DVD screen is displayed.
● If media is not detected, restart the Burn CD/DVD screen.
Writing Data to a USB Memory Device
(Operation on the Unit)
Insert the USB memory device that you wish to export data to
into VR-N1600U/VR-N1600E/VR-N900U, and perform the same
procedures for [Burning a CD/DVD] from Steps 1 to 9. (A Page
43)
1
Specify the export destination
● To export to a USB memory device, select [USB].
2
Click [Export]
● Export begins.
Writing Images/Audio Sound
to CDs, DVDs and Other Media
(Export) (continued)
2
[USB] Check
Button
VR-N1600_J.book Page 46 Tuesday, June 3, 2008 2:26 PM