JVC VR-N1600E User Manual
Page 43
35
Memo :
● If you have selected a camera for which an audio source
has been set on the [Camera Settings] screen of [Camera
Record Setting], the preset audio sound is being output.
(A Page 51)
● If you have selected a camera for which an audio source
has not been specified, the most recently selected audio
source will be continuously output.
● When the recorded and live images are simultaneously
displayed, the displayed video image and audio sound
may not synchronize properly. (However, this has no
impact on recording to the system or additional hard disk.)
Ⅵ Manually Triggering an Event
To manually trigger an event, select the event in the [Event]
section, and click the [Activate] button.
Memo :
● For details on events, refer to [Camera Input/Output Port
● Events must be defined in advance. (A Page 91)
Ⅵ Triggering Outputs
To trigger an output, select the output in the [Outputs...] section,
and click the [Activate] button.
Memo :
● Outputs must be defined in advance.
(APage 94 [Specifying an Output])
(APage 99 [Specifying Output During Manual Control])
Ⅵ Camera Shortcut Menus
You can right-click on one of the images from the camera to
access the shortcut menu.
Items in the shortcut menu may vary according to the
configuration of the selected camera.
[Live] Screen
Click
[Live] Screen
Click
Item
Description
A
Camera
Displays the video image of another
camera in the selected position.
B
Sound
Notifications
Temporarily mutes warning sounds.
C
PTZ Presets
Moves the camera to the preset position
you have selected.
D
Matrix
Select this option to use the Milestone
XProtect Matrix feature.
Memo :
● For details, refer to the Milestone
XProtect Matrix manual available on
the website of Milestone Systems
(http://www.milestonesys.com).
● The URL address may be subject to
changes.
E
Send
Camera
Sends images from the selected camera
to another single-camera position in an
open view.
A
B
C
D
E
VR-N1600_J.book Page 35 Tuesday, June 3, 2008 2:26 PM