JVC VR-N1600E - Manual (Page 128)

120
Applications
Login to NVR Viewer (Continued)
2
Specify your login information in the following
fields
3
Click the [Connect] button
● The NVR Viewer screen appears after a short while.
Memo :
● If you have previously logged in to the NVR Viewer, a
message will appear asking if you want the view that was
used during the last login to be displayed. (Only when
connecting from a surveillance computer)
[Main View]:
Select this check box to restore the view that you last
used in the main window of the [NVR Viewer].
[Detached Views]:
Select this check box to display the views on the [Primary
Display] screen, multi-monitor, or floating screen.
Note :
● When you log out after reaching the maximum number of
distribution clients, you may need to wait for several
minutes before you can establish the connection again.
● When multiple computers are connected and audio sound
is played back, the sound may be distorted.
4
Set the display language according to the
country of use
A
Click the [ K] button at the top right corner of the
screen.
B
Select [Language] from the menu that appears.
C
Select the language used in your country from the
displayed submenu.
D
Click [OK] when you see a dialog box.
E
Click the [ ן] button at the top right corner to exit the
NVR Viewer.
BThe viewer will display in the selected language
during the next startup.
Connecting to a Computer
(continued)
Item Description
A Server
address For specifying the IP address and port
number of this unit. (For example, in the
case of [http://192.168.1.253:80], [:80] is
the port number. )
The port number is the number as
specified in [Server Configuration] under
[Image Server Setting]. (A Page 73)
B Authentication For selecting one of the three types of
authentication.
Select
ABasic authenticationB.
Windows
authentication
(current user) Windows authentication. Login as the
current Windows user.
Windows
authentication Windows authentication.
You can login as a Windows user, but a
user name and password will be required.
Basic
authentication Basic authentication.
A user name and password will be
required to login to this unit.
C User name For entering the Windows user name if you
have selected
AWindows authenticationB
for the [Authentication] item B. For
entering the user name registered in the
[User Administration] item under [Image
Server Setting](A Page 114) if you have
selected
ABasic authenticationB.
D Password For entering the login password for this
unit if you have selected
AWindows
authentication B for the [Authentication]
item B. For entering the password
registered in the [User Administration] item
under [Image Server Setting](A Page 114)
if you have selected
ABasic
authentication B.
A
C
D
B
E
F
ⅷ VR-N1600U/E
User name :vr-n1600
Password
:vr-n1600
ⅷ VR-N900U
User name : vr-n900
Password
:vr-n900
Item Description
E Remember
password Saves the password.
If you have selected
AWindows
authentication B or ABasic authenticationB
for the [Authentication] item B, selecting
this check box enables you to login the
next time simply by clicking the [Connect]
button.
F Auto-login Enables you to login automatically. Select
this check box to enable you to login to
[NVR Viewer] automatically.
[ K] Button [ ן] Button
VR-N1600_J.book Page 120 Tuesday, June 3, 2008 2:26 PM