Camera output settings – JVC VR-N1600E User Manual

Page 107

Camera Output Settings

You can assign external outputs specified on the [I/O Setup]
screen to a camera, such as sounding of a siren or switching on
of lights.

● The assigned outputs can be triggered automatically

when motion is detected, or manually by pressing the
output buttons.

● You can display the [Output Settings] screen by clicking

the [Outputs...] button on the [Camera Recording
Administator] screen (A Page 51).

Ⅵ Specifying Output During Manual Control

You can specify outputs to be triggered manually using the
output button or from a list on the [Live] screen.

Select an output from the [All Output] list

Click the

button between the [All Output]

and [On Manusl Control] lists

● Doing so copies the selected output to the [On Manusl

Control] list.

● You can use the Up/Down buttons at the top right

corner of the [On Manusl Control] list to move the
selected output upward/downward within the [On
Manusl Control] list.

● To delete an output from the [On Manusl Control] list,

select the output and click the [

] button between the

[All Output] and [On Manusl Control] lists.

Ⅵ Specifying Output via Motion Detection

You can specify outputs to be triggered automatically when
motion is detected.

Select an output from the [All Output] list

Click the

button between the [All Output]

and [On Motion Detected] lists

● Doing so copies the selected output to the [On Motion

Detected] list.

● To delete an output from the [On Motion Detected] list,

select the output and click the [

] button between the

[All Output] and [On Motion Detected] lists.

[Output Settings] Screen

VR-N1600_J.book Page 99 Tuesday, June 3, 2008 2:26 PM