JVC VR-N1600E - Manual (Page 114)

106
Applications
This section enables you to specify the database settings.
Select a camera from [Main Menu]-[Camera Record Setting]-
[Device Manager], and select -[Settings...].
Memo :
● Recorded image data is referred to as the database in this
manual.
The recorded images are saved as database.
Ⅵ Specify the database settings
Memo :
● The database can store up to 600,000 records.
● The maximum database size is set to 108,000 records by
default. Do not change this setting as it may adversely
affect the recording time and recording performance.
● When archiving is used, you can store images without
being constrained by this limit.
● The following screen may appear for some settings.
When it appears, click [No].
Note :
● If you are not using a UPS, it is recommended that you
select AMax timespan in databaseB and set the time to
A60minutesB.
Database Settings
Item Description
A Max.records
in database Saves recorded images to the database
until the maximum number of records is
reached. Specify the maximum number
of records in the neighboring field.
If the [Archive automatically when
database is full]C check box is not
selected, old records are automatically
overwritten upon exceeding the maximum
number of records.
B Max
timespan in
database Saves recorded images to the database
up to the specified recording time.
Specify the total recording time from the
list in the neighboring field in minutes,
hours and days.
If the [Archive automatically when
database is full]C check box is not
selected, old records are automatically
overwritten upon exceeding the recording
time.
C Archive
automatically
when
database is
full Starts archiving data automatically when
the database is full.
Deletes old archive data when the
available space of the hard disk is
running low.
A
B
C
D
E
[Camera Settings] Screen
Item Description
D In case of
database
failure the
following
action
syould be
taken For selecting the action to take when
problems are found in the database. The
number of options available varies
depending on whether archiving is
enabled.
Select
AArchive(no repair)B. If you have
selected another option, the data may be
lost if problems occur in the database.
[Repair,Scan,Delete if fails]:
Two different repair methods, quick repair (recovery) and
complete repair (scan), are used. Content of the database
will be deleted if both repair methods fail.
[Repair,Delete if fails]:
The fast repair method is used. Content of the database
will be deleted if fast repair fails.
[Archive if fails]:
This option is available only if archiving is enabled for the
camera. The fast repair method is used. Content of the
database will be archived if fast repair fails.
[Delete(no repair)]:
Do not select this item.
[Archive(no repair)]:
This option is available only if archiving is enabled for the
camera. Content of the database is archived. Select this
option.
E Datebase
path Do not change the settings.
VR-N1600_J.book Page 106 Tuesday, June 3, 2008 2:26 PM