JVC VR-N1600E User Manual

Page 27

Selecting a language

The [Language Setting] screen appears when you start up this
unit for the first time. Select the language to use using the steps
below.

Select a language

● Use the [2/D] or [10/0/E](8/E) button to select a

language.

Use the [SKIP] button to select [OK], followed by

pressing the [16/ENTER](ZOOM IN/ENTER)
button

● The AThe system is being set up.B message may

appear depending on the setting, and the system is
automatically rebooted.

Memo :

● Selecting [OK] changes the color of the [OK] characters

from brown to orange.

Automatic Registration of Cameras

After you have started up this unit for the first time and finished
selecting a language, the [Auto Detect] screen appears.

Check to ensure that [Auto Detect] is selected,

followed by pressing the [16/ENTER](ZOOM IN/
ENTER) button

● The APlease wait...B message appears.

Memo :

● The characters of the selected item switches to orange

color.

Memo :

● In the case of VR-N900U, the analog input appears on the

[Auto Detect] screen from the start as the

AAnalog-inB

network encoder (IP video server) of

A192.168.201.12B.

Check to ensure that the camera is detected

● After the message disappears, a list of detected

cameras is displayed.

● If all the cameras are not detected, press the [Auto

Detect] button again. If doing so does not solve the
problem, check the connection with the cameras and
the IP address of the cameras.

Replace the detected camera accordingly in

sequence

Use the [SKIP] button to select the Sort button, followed by
pressing the [16/ENTER](ZOOM IN/ENTER) button to sort the
order of the detected cameras in sequence.

● The Sort button allows you to perform [IP] sort, [MAC]

sort, [CH] sort, [MAKER] sort, or [MODEL] sort.

● After using the [SKIP] button to select the list, followed

by using [2/D] or [10/0/E](8/E) to select a camera, use
the [SKIP] button to select [Up] or [Down], and press
the [16/ENTER](ZOOM IN/ENTER) button to change
the sequence of the cameras.

● Deselect the check box of any camera that you are not

using.

Note :

● Do not remove the check for Analog-In. (VR-N900U)

Memo :

● Priority is given to cameras at the top of the list during

use, and camera numbers will be registered in sequence

from the top.

Use the [SKIP] button to select [Entry], followed

by pressing the [16/ENTER](ZOOM IN/ENTER)
button

● The camera that is automatically detected is registered

in the system.

Select the analog input channel and signal

format to be used (VR-N900U)

NR-N900U

VR-N1600_J.book Page 19 Tuesday, June 3, 2008 2:26 PM